SPECTRAN V6 ECO 150XA-6
€7,988.00
Product information "SPECTRAN V6 ECO 150XA-6"
9 kHz – 6 GHz | 16-bit USB Real-Time Spectrum Analyzer & Signal Generator
Aaronia’s latest high-performance, low-cost real-time spectrum analyzer, the SPECTRAN® V6 ECO, features a real-time bandwidth of 2 × 44 MHz at 16-bit resolution.
The compact aluminum housing, measuring just 210 × 115 × 30 mm (850 g), requires minimal lab space and, thanks to its low power consumption, is also ideal for mobile applications (e.g., laptop use). It is available as a Spectrum Analyzer RX, Dual RX, or RX + TX version.
The Fastest
The V6 ECO completes a full 6 GHz scan in under 2 ms, corresponding to a sweep speed of 3 THz/s (optional). Measurement data is transmitted via a USB 3.x interface as I/Q raw data or FFT data.
If the connected computer supports USB-PD functionality, the included power supply is not required — only a single USB connection cable is necessary.
Included Modular Software: RTSA-Suite PRO
The supplied RTSA-Suite PRO software already includes, in its basic version:
- Over 20 measurement units
- 5 detectors (including AVG and QPEAK)
- Interfaces to popular programs such as MATLAB®, GNU Radio, and SDRangel
- A wide variety of unique visualization options, expandable via license keys
Technical Highlights
- Up to 2 × 44 MHz IQ bandwidth (without TX, dual receiver at 44 MHz IQ RTBW)
- 3 THz/s sweep speed (optional)
- -170 dBm DANL/Hz (4 dB NF)
- 16-bit ADC
- SDR interfaces to GNU Radio, SDRangel & MATLAB®
Available Versions
| Version | Frequency Range | Configuration | Description |
|---|---|---|---|
| SPECTRAN V6 ECO 100XA-6 | 6 GHz | 1× RX | Spectrum Analyzer / SDR (2 × 44 MHz RTBW) |
| SPECTRAN V6 ECO 150XA-6 | 6 GHz | 1× RX + 1× TX | Spectrum Analyzer and Signal Generator (2 × 44 MHz RTBW) |
| SPECTRAN V6 ECO 200XA-6 | 6 GHz | 2× RX | Dual Spectrum Analyzer (2 × 44 MHz RTBW) |
Optional Features
- Internal preamplifier
- Frequency extension to 7.2 GHz
- Internal GPS
- OCXO time base
- Extended temperature range
RSA-V6-ECO Connections
- 1 × RX/TX (50 Ω SMA)
- 2 × RX/TX (50 Ω SMA) (optional)
- 1 × RX + 1 × TX (50 Ω SMA) (optional)
- 1 × USB-C PD
Specifications
- Frequency range: 9 kHz to 6 | 7.2 GHz
- Real-time bandwidth (Rx): up to 88 (2 × 44) MHz via 1× USB
- Real-time bandwidth (Tx): 44 MHz (optional)
- Max. input power (Rx): +23 dBm
- Max. output power (Tx): +20 dBm
- DANL: -170 dBm/Hz (typ., internal preamp on)
- Amplitude accuracy: ±0.5 dB (typ., FIR-compensated)
- USB connection: 1× USB 3.1 or 3.2 PD
- Frequency reference accuracy: 0.5 ppm (5 ppb with OCXO option)
- Resolution bandwidth (RBW): 62 mHz to 200 MHz
- Measurement units: Over 20 (e.g. dBm, dBμV, V/m, A/m, W/m², dBμV/m, W/cm²)
- Detectors: Min, Max, AVG, Peak, QPeak
- Attenuator: Range 50 dB / 70 dB (0.5 dB steps)
- Traces: Over 20 (ACT, AVG, MAX, MIN, QPEAK, etc.)
- Measurement modes: True IQ or Power/Frequency data
- Triggers: Cursor, Measurement, Density
- ADC: 2 GSPS, 16-bit
- DAC: 2 GSPS, 14-bit
- GPS: GPS/QZSS, GLONASS, BeiDou, Galileo (concurrent)
- GPS synchronization: ±10 ns timestamping per data packet
- External frequency reference input: typ. 10 MHz, 3.5 VRMS, 50 Ω (SMB)
- DSP processing: 930 GMACs
- SDRAM: 2 GB
- RF connectors: SMA (Rx/Tx), SMB (Trigger, RefClock, GPS, PPM) — all 50 Ω
- Operating temperature: 0 °C to +50 °C (extended -40 °C to +75 °C)
- Dimensions: 210 × 115 × 30 mm
- Power supply: USB 3.2 Gen 1 Type-C PD 3.0
- Power consumption: Typical 10 W
- Country of origin: Germany
- Recommended calibration interval: 2 years