SPECTRAN® V6 ECO USB-Realtime-Spectrumanalyzer 1 RX Version

Spectran V6 ECO
9 kHz - 6 GHz 16 Bit USB Realtime-Spectrumanalysator & Realtive Vector Signal Generator

Fast, compact and powerful
Aaronia presents the SPECTRAN® V6 ECO, a realtime, high-performance, spectrum analyzer and monitoring receiver designed to capture even the shortest signal transmissions. Its scanning speed and recording time are unrivaled. The analyzer scans 6GHz in 2ms (3THz/s - optional), making it the world's fastest USB spectrum analyzer.

Perfect for any RF problem
This spectrum analyzer enables you to conquer almost any challenge. Whether it’s spectrum monitoring, RF and microwave measurements, Interference hunting, EMC testing or Wi-Fi and wireless network measurements, the SPECTRAN® V6 ECO is the ideal spectrum analyzer for making reliable and fast measurements.

Compact and lightweigh
The V6 ECO is ideal for measurements in both the field and in the lab. The included analysis software, RTSA-Suite PRO, transforms the V6 ECO into a fully- featured benchtop spectrum analyzer. The V6 ECO offers a solution for almost every application.

Made in Germany
The SPECTRAN ® V6 ECO spectrum analyzer and vector signal generator is designed
and assembled in Germany, guaranteeing the highest quality standards.

 

Technische Daten:

• 2x44 MHz IQ Bandbreite (o. Tx, Dual Receiver bei 44 MHz IQ RTBW)
• 3 THz/s Sweep Speed
• -170dBm DANL/Hz (4dB NF)
• 16-Bit ADC
• SDR Schnittstellen z.B. zu GNU Radio, SDRangel & MATLAB®

RSA-V6-ECO Connections:

• 1 x RX/TX (50 Ohm SMA)
• 2 x RX/TX (50 Ohm SMA)  (optional)
• 1 x RX + 1 x TX (50 Ohm SMA)  (optional)
• 1 x USB-C - PD

• Frequency range: 9kHz to 6|7,2GHz
• Real-time bandwidth Rx: up to 88 (2 x 44) MHz via 1x USB
• Real-time bandwidth Tx: 44 MHz (optionally)
• Max. power Rx: +23 dBm
• Max. power Tx: +20 dBm
• DANL: (internal pre-amp on) Typ. -170 dBm/Hz
• Amplitude accuracy (typ.): Typ. +/- 0,5 dB (compensated by FIR filter)
• USB streaming connection: 1x USB 3.1 or 3.2 PD
• Frequency reference accuracy: 0,5 ppm (5 ppb via OCXO option)
• RBW: (resolution bandwidth) 62 mHz to 200 MHz
• Measurement units: Over 20 (e.g. dBm, dBμV, V/m, A/m, W/m², dBμV/m, W/cm²)
• Detector: Min, Max, AVG, Peak, QPeak
• Attenuator: range 50 dB / 70 dB (0,5 dB steps)
• Traces: Over 20 (e.g. ACT, AVG, MAX, MIN, QPEAK)
• Measurement modes: True IQ or Power/Frequency data
• Trigger: Cursor, Measurement, Density
• ADC: 2GSPS 16 Bit
• DAC: 2GSPS 14 Bit
• GPS: GPS/QZSS, GLONASS, BeiDou and Galileo (concurrent reception)
• GPS synchronisation: +/- 10ns timestamping in each data packet
• External Frequenc Reference Input: typ. 10MHz, 3,5VRMS into 50 Ohm (SMB-connector)
• DSP processing: 930 GMACs
• SDRAM: 2 GB
• RF connectors: SMA (Rx,Tx), SMB (Trigger, Refclock, GPS, PPM). All 50 Ohms.
• Temperature range: (operation) 0 °C to +50 °C (extended -40 to +75 °C)
• Dimensions: 210 x 115 x 30 mm
• Power: USB 3.2 Gen 1 Type-C PD 3.0
• Power consumption: Typical 10 W
• Country of origin: Germany
• Recommended calibration interval: 2 years